Almost all homeowners rely on dryers and washers for cleaning their clothes. Any of these improper working appliance can cause a lot of discomfort and inconvenience. To ensure that they keep functioning properly, its important to maintain them. A homeowner should be well acknowledged of all the techniques involved in cleaning and troubleshooting a washing machine.
Few of the maintenance tips are:
1. Replace water supply hoses
Hoses are pipe openings that are used to fill the washer with water. With time and usage, they are prone to become brittle. A damaged or cracked hose can allow water to leak out and flood the laundry room. To prevent this problem, its necessary to inspect the washer hoses for any cracks or stiffness. If needed, replace the worn out rubber hoses with stronger ones.
2. Prevent and remove odors
Bacteria and mold can develop inside a washer, if its not allowed to dry properly after every use. For top-loading washers, keep the lid opened to ensure faster drying. For front-loading washers, take a clean towel and rub it inside the drum, so as to soak water droplets which are left after the drain cycle.
3. Clean the dryer vent
To maintain efficiency of cleaning, its advised to clean the lint tray after every dryer cycle to prevent fire hazards. The dryer vent should be cleaned every 6 months to ensure more protection and safety. To follow the cleaning process, disconnect the exhaust pipe and vacuum clean the vent pipe to remove as much lint as possible.
4. Check the material of dryer vent
Before using the vacuum cleaning technique, find out the material a dryer vent is made of. If its manufactured using white vinyl tubing, replace it with aluminum one as vinyl materials are more prone to fire as compared to aluminum. One should consult a dryer repair professional Oakville, to find out the safest dryer vent available in market that meets all the fire safety standards.
Troubleshooting Washer and Dryer Problems:
Problem I. Washer rattles during the spin cycle
This problem is often faced due to unbalanced load of clothes that can force a washer to shake and rattle during the spin cycle. An easy solution to this problem is, distribute the load evenly in the spin tub. If you find that the machine isn’t leveled properly, adjust its feet with a wrench.
Problem II. A Leaky washer
Front-loading washers are more prone to leaks and therefore, needs a tight seal to prevent water leakage. If there’s any sort of water pooling on the floor, the gasket may have loosened up or isn’t sealed tightly. To deal with this issue, clean them to remove any build up which may be impelling them from closing. If the leak continues, either replace the gasket or call an appliance repair expert to look into the situation.
Problem III. The dryer produces little heat
Poor performance of a dryer may be because of low airflow. Avoid overloading the drum, as proper space is required for effective movement of air. A little heat can be the result of a broken heating element, ignition or thermal fuse which requires skilled technician for replacement or repairs.
These were the few problem areas of washers and dryers along with repair solutions and maintenance tips. Appliance repair Oakville is a reputed company that offers a wide range of installation and troubleshoot solutions for all home appliances in Oakville at affordable prices.